What does information code tC mean on Samsung DW50R4050BB?
If your Samsung Dishwasher displays information code tC and fails to operate, it indicates that the temperature sensor is broken. If the problem continues, contact an authorised Samsung service center.
Why is my Samsung Dishwasher too noisy?
A noisy dishwasher can stem from a few causes. The dispenser cover opening and the drain pump operating is normal. If the dishwasher is not level, make sure it is. Also, the nozzle might be bumping against the dishes, creating a chopping sound (rearrange the dishes).
How to fix a Samsung Dishwasher that won't start?
If your Samsung Dishwasher isn't starting, here's what to check: * Ensure the door is fully latched and completely closed. Also, verify that the upper rack is correctly joined with the nozzle and properly assembled. * Confirm the power cord is securely connected. * Ensure the water supply valve is open. * Deactivate the Control Lock if it's enabled.
Why does my Samsung Dishwasher leave food on dishes?
If your Samsung Dishwasher leaves food on dishes, it could be due to several reasons: * Selecting the wrong cycle. Choose a cycle appropriate for the soil level of your dishes. * Clogged or improperly fastened filters. Clean the filters and ensure they are correctly fastened. * Using too little detergent. Use the correct amount of detergent for each load. * Low water pressure. Ensure the water pressure is between 0.04–1.0. * Clogged nozzles. Clean and unclog the nozzles. * Improperly loaded or overloaded dishes. Arrange dishes so they don't block the nozzles or detergent dispenser. * Hard water. Check the salt refill indicator and refill with dishwasher salt if needed.
Why is my Samsung DW50R4050BB Dishwasher so noisy?
If your Samsung Dishwasher is too noisy, here are a few things to check: * The noise might be normal if it occurs when the dispenser cover opens and the drain pump operates. * Ensure the dishwasher is level. * Rearrange the dishes if the nozzle is bumping against them, creating a chopping sound.
Why don't the indicators light up on my Samsung DW50R4050BB?
If the indicators on your Samsung Dishwasher do not light up, make sure the power cord is connected properly.
Why does a white coating remains on dishes after using Samsung DW50R4050BB Dishwasher?
If a white coating remains on dishes, the water is likely too hard. Make sure the salt fill indicator and softener settings are correct according to the water hardness of your area, and ensure the salt storage cap is correctly fastened.
Why are there air bubbles and scratch marks on the control panel of my Samsung DW50R4050BB?
If you see air bubbles and scratch marks on the control panel, it's because air gets into the protective film, causing EPS marks to remain. Remove the protective film from the control panel.
What to do if Samsung DW50R4050BB has bad odours?
If your dishwasher has bad odours, it might be due to water remaining from the previous cycle. To resolve this, with the dishwasher empty, add detergent, and then run the Quick cycle (this is available only on applicable models).
How to prevent white coating on dishes in Samsung DW50R4050BB Dishwasher?
If a white coating remains on dishes in your Samsung Dishwasher, the water may be too hard. Ensure the salt refill indicator and softener settings are correct for your area's water hardness, and make sure the salt storage cap is correctly fastened.
Basic precautions to reduce the risk of fire, electric shock, or injury.
Guidelines for safe and proper usage of the dishwasher in domestic environments.
Safety measures and warnings to keep children safe around the dishwasher and detergents.
Step-by-step guidance and precautions for safely installing the dishwasher.
Details electrical, water supply, and grounding requirements for safe installation.
Detailed instructions for selecting a location and performing the installation.
Requirements for water pressure and temperature for the water supply line.
Detailed steps for fitting a custom door panel to the dishwasher.
Guide on how to adjust the dishwasher's height for proper leveling.
Methods for securing the dishwasher to the countertop or cabinet.
Instructions on how to adjust and use the upper and lower racks.
Overview of the dishwasher's control panel buttons and indicators.
Description of each available wash cycle and its purpose.
Instructions for cleaning the coarse and micro filters monthly.
A table listing common symptoms, possible causes, and actions to resolve them.
Explains error codes displayed on the dishwasher and how to address them.
General| Door color | White |
|---|---|
| Product size | Slimline (45 cm) |
| Tub material | Stainless steel |
| Built-in display | Yes |
| Appliance placement | Fully built-in |
| Control panel color | Blue |
| Cutlery compartment type | Drawer |
| Feet adjustment | 50 mm |
| Wi-Fi controlled | No |
| Remaining time indication | - |
| Cycle time | - min |
| Noise level | 46 dB |
| Dishwashing programs | Auto, Glass/delicate, Eco, Normal, Quick |
| Number of place settings | 10 place settings |
| Number of washing programs | 6 |
| AC input voltage | 220 - 240 V |
| Drain pump power | 30 W |
| AC input frequency | 50 Hz |
| Circulation motor power | 98 W |
| Energy efficiency scale | A to G |
| Water consumption per cycle | 9.9 L |
| Energy consumption per cycle | 0.83 kWh |
| Package depth | 650 mm |
| Package width | 510 mm |
| Package height | 885 mm |
| Package weight | 39000 g |
Weight and Dimensions| Depth | 550 mm |
|---|---|
| Width | 450 mm |
| Height | 815 mm |
| Weight | 33000 g |
To Next Page
