What does information code tC mean on Samsung Dishwasher?
If your Samsung Dishwasher displays information code tC and fails to operate, it indicates that the temperature sensor is broken. If the problem continues, contact an authorised Samsung service center.
Why is my Samsung DW50H4050 too noisy?
A noisy dishwasher can stem from a few causes. The dispenser cover opening and the drain pump operating is normal. If the dishwasher is not level, make sure it is. Also, the nozzle might be bumping against the dishes, creating a chopping sound (rearrange the dishes).
How to fix a Samsung DW50H4050 Dishwasher that won't start?
If your Samsung Dishwasher isn't starting, here's what to check: * Ensure the door is fully latched and completely closed. Also, verify that the upper rack is correctly joined with the nozzle and properly assembled. * Confirm the power cord is securely connected. * Ensure the water supply valve is open. * Deactivate the Control Lock if it's enabled.
Why does my Samsung DW50H4050 leave food on dishes?
If your Samsung Dishwasher leaves food on dishes, it could be due to several reasons: * Selecting the wrong cycle. Choose a cycle appropriate for the soil level of your dishes. * Clogged or improperly fastened filters. Clean the filters and ensure they are correctly fastened. * Using too little detergent. Use the correct amount of detergent for each load. * Low water pressure. Ensure the water pressure is between 0.04–1.0. * Clogged nozzles. Clean and unclog the nozzles. * Improperly loaded or overloaded dishes. Arrange dishes so they don't block the nozzles or detergent dispenser. * Hard water. Check the salt refill indicator and refill with dishwasher salt if needed.
Why is my Samsung DW50H4050 Dishwasher so noisy?
If your Samsung Dishwasher is too noisy, here are a few things to check: * The noise might be normal if it occurs when the dispenser cover opens and the drain pump operates. * Ensure the dishwasher is level. * Rearrange the dishes if the nozzle is bumping against them, creating a chopping sound.
Why don't the indicators light up on my Samsung DW50H4050 Dishwasher?
If the indicators on your Samsung Dishwasher do not light up, make sure the power cord is connected properly.
Why does a white coating remains on dishes after using Samsung DW50H4050?
If a white coating remains on dishes, the water is likely too hard. Make sure the salt fill indicator and softener settings are correct according to the water hardness of your area, and ensure the salt storage cap is correctly fastened.
Why are there air bubbles and scratch marks on the control panel of my Samsung Dishwasher?
If you see air bubbles and scratch marks on the control panel, it's because air gets into the protective film, causing EPS marks to remain. Remove the protective film from the control panel.
What to do if Samsung DW50H4050 has bad odours?
If your dishwasher has bad odours, it might be due to water remaining from the previous cycle. To resolve this, with the dishwasher empty, add detergent, and then run the Quick cycle (this is available only on applicable models).
How to prevent white coating on dishes in Samsung DW50H4050 Dishwasher?
If a white coating remains on dishes in your Samsung Dishwasher, the water may be too hard. Ensure the salt refill indicator and softener settings are correct for your area's water hardness, and make sure the salt storage cap is correctly fastened.
General| Brand | Samsung |
|---|---|
| Model | DW50H4050 Series |
| Category | Dishwasher |
| Language | English |
To Next Page