English34
Installation
Installation
Kick plate (DW60A60**U* Series)
If you want to install the kick plate, follow these steps.
1. Insert the provided brackets to the
bottom of the dishwasher. Turn them
into position.
• See the gure on the left for the correct
attaching sequence and place of the
brackets.
2. Insert the kick plate into the brackets
rst, and then tighten the 4 kick plate
bolts and nuts to x the kick plate.
NOTE
If the dishwasher is raised by levelling the
foot, move kick plate down so that the kick
plate ts in bottom.
3. Push the kick plate with the brackets
into the bottom of the dishwasher as
shown.
CAUTION
Make sure the kick plate does not interfere
with the dishwasher’s door opening and
closing.
DW6500AM_DW60A6092FW_EU_DD81-04050B-01_EN.indd 34 2021-09-30 12:36:20
To Next Page
Loading...
