English40
Installation
Installation
WSN
1. How to access: press and hold the Start button in AP mode. (To enter the AP mode, press
and hold the Smart Control button for 3 seconds.)
2. Display format
- After receiving WSN data from WiFi module, “-” + rst 2 digits are diplayed and next
3 digits are diplayed by every “start” button pressing.
- Beep is generated when the “start” button is pressed for displaying digits.
- Display example : “-” for the starting display
ex) WSN : “01234567897835”
DW8500AM_DW60A8070BB_EF_DD81-03206D-01_PL+EN.indb 40DW8500AM_DW60A8070BB_EF_DD81-03206D-01_PL+EN.indb 40 2021-03-24 �� 1:01:022021-03-24 �� 1:01:02
To Next Page
Loading...
