English 31
Installation
Pre-cut skirting board (Except Free Standing model)
1. Insert the provided brackets to the
bottom of the dishwasher. Turn them
into position.
• See the gure on the left for the correct
attaching sequence and place of the
brackets.
456.9
2. Insert the pre-cut skirting board into
the brackets rst, and then tighten the
screws to x the board. See the gure
on the left and make sure the brackets
are positioned in the correct place.
CAUTION
Make sure the skirting board does not
interfere with the dishwasher’s door
opening and closing.
3. Push the skirting board with the
brackets into the bottom of the
dishwasher as shown.
FULL_DW60BB890UAPET_DD68-00254C-00_EN.indd 31 2023-03-09 6:27:36
To Next Page
Loading...
