English56
Operations
Operations
Simple steps to start
1. Open the door, and then load the dishwasher. Make sure to remove food remains and
waste on the dishes.
2. Apply detergent to the detergent dispenser. For better results, add rinse aids.
3. Press Power, and then select a cycle with necessary options (Half Load, Speed Booster,
Hygiene Plus, and Delay Start). Some options may not be available depends on the
cycle.
4. Press START, and then close the door. The dishwasher starts the cycle after draining for
a few seconds.
NOTE
• To change the cycle after it has started, press and hold START for 3 seconds to cancel
the cycle. Then, select a new cycle.
• The default cycle is ECO.
• To resume after you have opened the door to stop the dishwasher while operating,
simply close the door.
FULL_DW60BB890UAPET_DD68-00254C-00_EN.indd 56 2023-03-09 6:27:47
To Next Page
Loading...
