English - 36
Troubleshooting and
information codes
CHECK THESE POINTS IF YOUR DISHWASHER...
PROBLEM POSSIBLE CAUSE SOLUTION
Will not start.
The door is not closed
completely.
Check if the door is latched and closed
completely. Check whether the Upper Rack is
properly joined with Duct Nozzle.
Also, Check imbalance assembly of the Upper
Rack.
The Start (Reset) button is
not selected.
Check that the door is latched and closed
completely. Press the Start (Reset)
button
before closing the door.
No programme is selected. Select a programme.
The power cord is not
connected.
Connect the power cord.
There is no water supplied. Check that the water supply valve is open.
The control panel is locked.
Deactivate the Control Lock function to
unlock the control panel.
Has a bad odour.
There is water left over from the
last cycle.
Add detergent without loadingdishes and run
the Self Clean
programme to clean the
dishwasher.
Has water remaining
after the programme
has fi nished.
The drain hose is folded or
clogged.
Straighten and unclog the hose.
FS_DW9000H-00158A-08_EN.indd 36FS_DW9000H-00158A-08_EN.indd 36 2016-08-12 5:20:392016-08-12 5:20:39
To Next Page
Loading...
