Operations
Operations
English30
Settings
You can change the sound settings or display brightness to your preference. To change
the settings, press the Sanitize and Delay Start buttons simultaneously for 3 seconds.
Press Sanitize to navigate through sub menus, and press Delay Start to conrm your
changes.
Sound
U1/U0
Brightness*
b0-b5
Water softener
L0-L5
Auto Door
A1/A0
* applicable models only
Sound
Press Sanitize until ‘U1’ or ‘U0’ is displayed. To mute the dishwasher, select ‘U0’, and then
press Delay Start. To unmute, select ‘U1’, and then press Delay Start.
Display brightness
Press Sanitize until ‘b0 - b5’ is displayed. The higher the number, the brighter the display.
Select a number, and then press Delay Start.
DW9000M_DD68-00191D-01_EN.indd 30 2/20/2018 12:26:14 PM
To Next Page
Loading...
