To Next PageTo Next PageWhy won't my Samsung Dishwasher start?
Your Samsung Dishwasher might not start due to several reasons. Ensure the door is completely closed and latched. Check that you've selected a cycle. Verify the power cable is properly connected and the water supply valve is open. Also, the control panel might be locked, so unlock the child lock. Finally, check if a circuit breaker is open and reset it if necessary.
Why is my Samsung DW80F800UWS/AA Dishwasher so noisy?
A noisy Samsung Dishwasher can be due to several reasons. The sound could be normal operation when the dispenser cover opens and the drain pump operates early in the cycle. Ensure the dishwasher is level. If there's a chopping sound, rearrange the dishes, as a nozzle might be bumping against them. For foreign material in the pump chamber, contact a qualified service technician.
How to improve drying in my Samsung Dishwasher?
If your Samsung Dishwasher isn't drying dishes well, make sure there is rinse aid in the dispenser and that you are using a liquid type rinse aid. Ensure the water supply line is connected to a hot water supply and consider using rinse aid with the Sanitize option. Avoid overloading the dishwasher, as proper loading affects drying. If you have glasses and cups with concave bottoms, empty the lower rack first after the cycle to prevent water from dripping onto the dishes below.
How do I remove yellow or brown film inside my Samsung DW80F800UWS/AA Dishwasher?
The yellow or brown film inside your Samsung Dishwasher is likely caused by coffee and tea soils. Remove the soils using a spot cleaner.
What to do if water won't pump out of my Samsung DW80F800UWS/AA Dishwasher?
If water won't pump out of your Samsung Dishwasher, the drain might be clogged. Contact a qualified service technician to remove any obstruction from the drain hose and check the drain pump operation.
Why is my Samsung DW80F800UWS/AA Dishwasher cycle taking so long?
If your Samsung Dishwasher cycle is taking too long, it might be due to cold water being supplied. Ensure that the water supply line is connected to a hot water supply, as additional time is needed to heat cold water.
What to do if my Samsung DW80F800UWS/AA Dishwasher has a bad odor?
If your Samsung Dishwasher has a bad odor, it could be due to water left over from an incomplete cycle. Try inserting detergent without loading dishes and running the Normal cycle to clean the dishwasher. If the dishwasher is not used daily or soiled dishes are left in the unit too long, place a glass with 8 ounces of vinegar upright into the lower rack with the dishwasher empty and no detergent, and then run a Normal cycle. For an obstructed drain hose, contact a qualified service technician.
Why does my Samsung DW80F800UWS/AA leave glasses with a dim polish?
If your Samsung Dishwasher leaves glasses with a dim polish, it could be because the water supplied is soft and too much detergent was used. Try underloading the dishwasher and using a rinse aid to minimize this. Also, if aluminum dishes were included in the wash load, remove the marks on the dishes using a low sensitivity cleaner.
General| Type | Built-In |
|---|---|
| Capacity | 15 Place Settings |
| Energy Efficiency | Energy Star Certified |
| Control Type | Electronic |
| Color | Stainless Steel |
| Third Rack | Yes |
| Soil Sensor | Yes |
| Delay Start | Yes |
Key safety precautions and warnings for operating the dishwasher.
Advises on preventing tip-over by ensuring correct installation and not applying excessive weight.
Details risks of electric shock and mandatory grounding procedures.
Explanation of the control panel buttons, indicators, and their functions.
Covers electrical, grounding, water supply, and flooring requirements for installation.
Detailed chart outlining different wash cycles, their steps, temperatures, and timings.
Guide to identify and resolve common issues like not starting or poor cleaning.
Solutions for problems like dim polish on glasses or yellow/brown film.
Addressing problems with dishes not drying well or bad odors.
Troubleshooting common noises like chopping sounds or pump operation.
Solutions for non-rotating nozzles, water not pumping out, or clogged drains.
Explanation of error codes displayed on the control panel and their solutions.
