16
Reverse Side
DVI IN
RGB / DVI /
HDMI / AV /
COMPONENT
AUDIO IN
PIM
DVI IN
RGB / DVI /
HDMI / AV /
COMPONENT
AUDIO IN
Port Description
HDMI IN
Connects to a source device using an HDMI cable.
SERVICE (5V 0.5A)
This port is used to upgrade the software.
EXTERNAL IR / AMBIENT SENSOR IN
Supplies power to the External ambient sensor board or receives the light
sensor signal.
External ambient sensor: Sold separately
RGB IN
Connects to a source device using a D-SUB cable.
DVI IN
Connects to a source device using a DVI cable or HDMI-DVI cable.
AUDIO OUT
Connects to the audio of a source device.
RGB / DVI / HDMI / AV / COMPONENT
AUDIO IN
Connect to audio input using an audio cable.
RS232C IN
Connects to MDC using an RS232C-stereo adapter.
RS232C OUT
PIM
Connects to a PIM. (Refer to the PIM user manual for details.)
COMPONENT / AV IN
Connects to a source device using the Component/AV cable.
To Next Page
Loading...
