Samsung Electronics
3-2-1 ADDRESS Set up
■ MAIN ADDRESS Setup
• MAIN(SW01) switch refers to the basic ADDRESS for MASTER-SLAVE communications. MAIN ADDRESS setting is required for
operating the product.
• From 0~F(15), up to 16 can be set.
• Mark ADDRESS of each SLAVE in the blueprint before installation, in order to set up ADDRESS according to the plan when installing
the products.
• MAIN ADDRESS setup is no required when utilizing a ventilator alone.
■ RMC ADDRESS Setup
• RMC ADDRESS setup refers to ADDRESS setup switch needed to control ventilator with centralized controller.
• RMC ADDRESS setup is not required in case of centralized control.
Indoor unit RMC ADDRESS 0 1 2 3 4 5 6 7 8 9 A B C D E F
Number on the centralized
controller
0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15
3-4
Alignment and Adjustments
27723A(1)_RHF-025EB_1.indd 4 2007-05-09 ｿﾀﾈﾄ 4:23:06
To Next Page