Samsung AE160MXTPGH User Manual

ECO HEATING SYSTEM CONTENTS
ECO HEATING SYSTEM
OUTDOOR UNIT
HYDRO UNIT
TANK INTEGRATED
HYDRO UNIT
1. Precautions
2. General Overview
3. Disassembly and Reassembly
4. Troubleshooting
5. PCB Diagram
6. Wiring Diagram
7. Piping Diagram
8. Reference Sheet
Model :
AE044MXTPEH
AE066MXTPEH
AE090MXTPEH
AE090MXTPGH
AE120MXTPEH
AE120MXTPGH
AE160MXTPEH
AE160MXTPGH
AE090MNYDEH
AE090MNYDGH
AE160MNYDEH
AE160MNYDGH
AE200TNWTEH
AE260TNWTEH
TDM PLUS

Samsung AE160MXTPGH Specifications

General

Brand	Samsung
Model	AE160MXTPGH
Category	Heating System
Language	English

Summary

Precautions

1-1 Precautions for the Service

Guidelines for performing service on the equipment.

1-2 Precautions related to static electricity and PL

Safety measures for handling static electricity and product liability.

1-3 Precautions for the Safety

Essential safety precautions to prevent hazards during operation and maintenance.

1-4 Precautions for handling a system containing refrigerants

Safe handling procedures for systems with refrigerants.

1-5 Precautions for the brazing

Safety guidelines for brazing operations related to refrigerant systems.

1-6 Precautions for charging refrigerants

Procedures and precautions for charging refrigerants into the system.

General Overview

2-1-1 Key features of the EHS(TDM PLUS)

2-5-1 Outdoor Unit

2-5-2 Hydro Unit

Disassembly and Reassembly

3-1 Necessary Tools

3-2 Disassembly and Reassembly

General instructions and procedures for disassembling and reassembling units.

3-2-1 Hydro Unit

Step-by-step guide for disassembling and reassembling Hydro Units.

3-2-2 Outdoor Unit

Detailed procedures for disassembling and reassembling outdoor units.

3-2-3 TDM PLUS Tank Integrated Hydro Unit

Specific disassembly and reassembly steps for TDM PLUS Tank Integrated Hydro Units.

Troubleshooting

4-1 Error Display

Shows error codes displayed on the unit's indicators.

4-2 Service Operation

4-2-1 Special Operation

4-2-3 Wired remote controller error code

Lists error codes related to wired remote controllers.

4-3 Troubleshooting by symptoms

Guides users through troubleshooting based on observed symptoms.

4-3-1 Communication error after finishing Tracking

Troubleshooting steps for communication errors after tracking is finished.

4-4 Hydro Unit

Specific troubleshooting for Hydro Units.

4-4-1 EEPROM error

4-4-2 Error due to abnormal data of Wired remote controller thermistor value

4-4-3 Water pump & flow switch OFF

4-4-4 Water pump & flow switch ON

4-4-5 Hydro unit temperature sensor(open/short)

4-4-6 Communication error after finishing Tracking(Hydro unit)

Troubleshooting communication errors specific to Hydro Units after tracking.

4-5 Items to check before diagnostics

4-5-2 Troubleshooting for outdoor unit

Troubleshooting steps for errors occurring in the outdoor unit.

4-5-3 Troubleshooting for outdoor unit(cont.)

Continuation of troubleshooting steps for outdoor unit errors.

4-6 Troubleshooting by symptoms

General troubleshooting guide based on symptoms.

4-6-1 Communication error after finishing tracking (E202)

4-6-2 Time out (1min.) of communication error between MAIN PBA and INV. PBA (E203)

4-6-3 Temperature sensor error (E221, E231, E251, E320)

4-6-4 Fan error (E458, E475)

4-6-5 Compressor error (E461, E467)

4-6-6 Current trip error (E462, E463)

4-6-7 IPM(IGBT module) over current error (E464)

4-6-8 DC-link voltage under/over error (E466)

4-6-9 GAS leak error(E554)

4-6-11 In case of heating at the cooling mode or cooling at the heating mode

4-6-12 Outdoor unit is not powered on – Initial diagnosis

Initial diagnostic steps when the outdoor unit is not powered on.

4-6-13 Outdoor unit power supply error

Troubleshooting power supply errors for the outdoor unit.