Samsung ERV - Power Supply and Circuit Breaker; During Operation

ENGLISH-5
01 PREPARATION
Before installing ERV wired remote controller
Accessories
ERV wired
remote controller
(1)
Cable tie (2) Cable clamp (2)
M4X16 screw
(2)
User manual (1)
Installation
manual (1)
U terminal (3)
• The ERV wired remote controller should be installed by an installation expert.
• Check and conrm the power is o before installing ERV wired remote controller.
• Install the ERV wired remote controller cables in accordance with the electrical wiring rules, and
allow it to pass through the inner area of the wall so that other people can’t reach it.
Caution
External dimension
[Unit: mm(inch)]
122.0(4.80)
75.0(2.95)
16.6
(0.65)
ERV Wired remote controller_MWR_VH12N_IM_EN_05309A-00.indd 5 2016-12-23 오후 6:02:53