Shooting options
53
Shooting in the dark
Flash options are not available if you rotate the drive mode dial to t
C
or
B
, or select Blink Detection.
Make sure that your subjects are within the recommended distance t
from the flash. (p. 120)
If there is reflected light or much dust in the air, tiny spots may appear t
on your photo.
Adjusting the flash intensity
Adjust the flash intensity to avoid overexposure or underexposure.
In Shooting mode, press [
1
F
].
Scroll to an option.
2
Rotate [
3
Zoom] right.
Option Description
Auto: The camera will select a proper flash setting for
the detected scene in the
t
mode.
Red-eye*:
The flash fires when the subject or background is t
dark.
The camera reduces red-eyes.t
Fill in:
The flash always fires.t
Light intensity is adjusted automatically.t
Slow Sync:
The flash fires and the shutter stays open longer.t
Select this when you want to capture ambient light to t
reveal more details in the background.
Use a tripod to prevent your photos from blurring.t
Red-eye Fix*:
The flash fires when the subject or background is t
dark.
The camera corrects red-eyes through its advanced t
software analysis.
Auto: The flash fires automatically when the subject or
background is dark.
The options may differ depending on the shooting mode.
* There is an interval between two bursts of the flash. Do not move until
the flash fires a second time.
To Next Page
Loading...
