Samsung F22T45 F Series - Page 5

2
• Place jig BH81-00001A in the decomposition hole on the lower left, and
make a gap by lowering it down.
Remark
* Be careful not
to damage
the source
PCB when
decomposing
DECO.
* Be careful not
to damage the
product when
using Jig.
3
• After decomposing COVER-DECORATION, Disassemble the lower hook
assembled between COVER-REAR and PANEL.
Remark
* Be careful not
to damage
the source
PCB when
decomposing
COVER-REAER.
5
LCD Monitor