9
Preparations
Chapter 02
Installation
Attaching the Stand
1
1 2
Put the stand base onto the stand neck as the direction
shown in the figure. Tightly fasten the connecting
screw at the bottom of the stand base.
Place the protective Styrofoam (cushion) included in
the package on the floor and place the product facing
down on the Styrofoam, as shown in the image. If
Styrofoam is unavailable, use a thick sitting mat.
3
3
4
4
Place the stand neck on the display, as shown in the figure. Stand assembly is complete.
To Next Page
Loading...
