Samsung FH052EAMT - Page 14

13Samsung Electronics
Disassembly and Reassembly
No Parts Procedure Remark
5
6
Stepping Motor
Display PCB
1) Loosen the 4 screws in rear side of front
cover assembly as shown in picture.
2) Loosen the 2 screws as shown in picture.
3) Disassemble the blade and stepping
motor assembly and remove the 2 screws
stepping motor.
1) Loosen the 3 screws in rear side of front
cover assembly as shown in picture.
2) Disassemble display PCB assembly
and disconnect wire.
3) Disassemble the display PCB.
DB98_14413A(1)_1** 10/9/03 5:40 PM Page 13