What to do if my Samsung Air Conditioner does not work?
If your Samsung Air Conditioner isn't working, try these steps: Ensure the power plug is correctly connected to the wall socket. Check if the circuit breaker is switched on and also check your fuse to make sure it is not blown. Finally, check if there is a power failure.
Why is my Samsung AM FNND Air Conditioner remote control not working?
If your Samsung Air Conditioner remote control isn't working, here are a few things to check: First, ensure your batteries aren't depleted and are correctly installed. Also, make sure nothing is blocking the remote control sensor. Finally, strong light from fluorescent bulbs or neon signs near the air conditioner may interrupt the electric waves.
Why is no cool air coming from my Samsung AM FNND?
If cool air isn't coming from your Samsung Air Conditioner, consider the following: Check if the set temperature is higher than the current temperature, and adjust it by pressing the Temperature button on the remote control. Ensure the air filter isn't blocked by dirt. If the unit was just turned on, wait 3 minutes. Also, make sure that the air conditioner is not installed in a place with direct exposure to sunlight, and that there is no cover or obstacle near the outdoor unit. Check if the refrigerant pipe is too long and also check if the air conditioner or the remote control is only available in Cool mode.
Why is water dripping from the blades of my Samsung Air Conditioner?
If water is dripping from the air low blades of your Samsung Air Conditioner, it may be because the unit has been cooling for an extended period with the blades pointed downwards. This can cause condensation due to temperature differences.
How to fix Samsung Air Conditioner temperature that doesn't change?
If the temperature on your Samsung Air Conditioner isn't changing, check if you've selected Fan mode. If so, press the Mode button on the remote control to select a different mode.
What to do if my Samsung Air Conditioner doesn't turn on/off with the wired remote?
If your Samsung Air Conditioner isn't turning on or off with the wired remote control, check if you have set the wired remote control for group control.
Why does the fan speed not change on my Samsung AM FNND?
If the fan speed on your Samsung Air Conditioner isn't changing, it might be because you've selected Auto or Dry mode. In these modes, the air conditioner automatically adjusts the fan speed.
What to do if odors permeate the room when operating my Samsung AM FNND?
If odors permeate the room when your Samsung Air Conditioner is running, it could be due to the appliance operating in a smoky area or smells entering from outside. Try operating the air conditioner in Fan mode or open the windows to air out the room.
Why doesn't my Samsung Air Conditioner operate immediately after restarting?
Your Samsung Air Conditioner will start in 3 minutes due to its protective mechanism.
Why does my Samsung AM FNND make a bubbling sound?
A bubbling sound may occur when the refrigerant is circulating through the compressor; in this case, let the air conditioner operate in a selected mode. Also, when you press the Power button on the remote control, noise may be heard from the drain pump inside the air conditioner.
General| Brand | Samsung |
|---|---|
| Model | AM FNND Series |
| Category | Air Conditioner |
| Language | English |
To Next Page