Why does the outdoor fan on my Samsung AM keep running after I turn it off?
When your Samsung Air Conditioner is turned off, the outdoor unit fan may continue to operate to reduce noise from the refrigerant gas. This is a normal operation.
Why is the remote control not working with my Samsung AM Air Conditioner?
If the remote control isn't operating your Samsung Air Conditioner, first check if the batteries are depleted and replace them if necessary. Then, ensure the batteries are correctly installed. Also, make sure nothing is blocking the remote control sensor. Finally, check for strong lighting apparatus near the air conditioner, as strong light from fluorescent bulbs or neon signs may interrupt the electric waves.
What to do if timer function does not set on Samsung AM?
Check if you press the Power button on the remote control after you have set the time.
Why does my Samsung AM Air Conditioner not turn on or off with the wired remote control?
Check if you set the wired remote control for group control.
What to do if the wired remote control does not operate on Samsung AM?
Check if TEST indicator is displayed on the wired remote control. If so, turn off the unit and switch off the circuit breaker. Call your nearest contact center.
Why does my Samsung AM smell bad?
If unpleasant odours permeate the room, and both indoor temperature and indoor humidity are high, operate your Samsung Air Conditioner in the Clean or Fan mode for 1 to 2 hours. If the air conditioner hasn't been used for a while, clean the indoor unit before operating it. Also, a dirty air filter can cause odors, so ensure you clean the air filter.
Why are there odors in the room when my Samsung AM is on?
If you are experiencing odors permeating in the room while your Samsung Air Conditioner is running, it could be due to the appliance operating in a smoky area or smells entering from outside. Try operating the air conditioner in Fan mode or open the windows to air out the room.
Why does my Samsung AM make a bubbling sound?
A bubbling sound may be heard when the refrigerant is circulating through the compressor of your Samsung Air Conditioner. Simply let the air conditioner operate in the selected mode. Also, when you press the Power button on the remote control, noise may be heard from the drain pump inside the air conditioner.
What does it mean if my Samsung AM has an error on the EVA OUT sensor of the indoor unit?
An error on the EVA OUT sensor of the indoor unit of your Samsung Air Conditioner indicates a short or open circuit.
What does it mean if my Samsung AM has an error on the room temperature sensor of the indoor unit?
An error on the room temperature sensor of the indoor unit of your Samsung Air Conditioner indicates a short or open circuit in the sensor.
General| Brand | Samsung |
|---|---|
| Model | AM Series |
| Category | Air Conditioner |
| Language | English |
Safety instructions and warnings specific to the installation process.
Safety guidelines and warnings related to the appliance's power supply.
Safety precautions and guidelines for operating the air conditioner.
Safety advice and precautions for cleaning the air conditioner.
Identification and description of the primary components of the indoor unit.
Specifies the recommended operating temperature and humidity ranges for the unit.
Instructions for pairing multiple indoor units with a single remote control.
Steps and precautions for cleaning the exterior surfaces of the indoor unit.
Instructions for cleaning the heat exchanger of the outdoor unit.
Detailed steps on how to detach and clean the air filter.
Procedures to reset the filter cleaning reminder after cleaning.
Schedule and requirements for regular maintenance of the unit.
Common problems and their solutions for the air conditioner.
Guide for selecting the location and mounting the indoor unit.
Procedure for testing the system for refrigerant gas leaks.
Instructions on how to properly insulate refrigerant piping and hoses.
Guidelines for connecting power and communication cables between units.
Guide for selecting and insulating crimping terminal lugs for power cables.
Details on terminal block dimensions and power specifications.
Table of rated currents for different indoor unit models.
Comprehensive guide for setting indoor unit addresses and installation options.
General procedure for entering the setting mode and selecting options.
Instructions for setting the addresses for indoor units and MCU.
To Next Page
