13
English
Cleaning and Maintenance
Cleaning and Maintaining
Cleaning the indoor unit exterior
Wipe the surface of the indoor unit with a tepid
damp cloth.
ŵʪͱЭʪϩ˵ʪʒЇϑϩɇʀʀЇЇɇϩʪʒϩ˵ʪɇθθͱи
gaps of the product with a soft brush.
CAUTION
࡛ Do not use alkaline detergent, sulphuric
ɇʀʒࡥ˵цʒθͱʀ˵ͱθʀɇʀʒࡥͱθͱθ˝ɇʀϑͱЭʪϩϑ
(such as thinner, kerosene, and acetone) to
clean the surfaces.
࡛ Do not attach any stickers on the surfaces
because this may cause damage.
࡛ When you clean the heat exchanger on the
indoor unit, you need to disassemble the
indoor unit. Therefore, you must contact the
ͱʀɇϑʪθЭʀʪʀʪϩʪθ˙ͱθ˵ʪΧ
Cleaning the outdoor unit heat exchanger
Spray water to clean the dust.
CAUTION
࡛ The heat exchanger of the outdoor unit has
sharp edges. Take care when cleaning its
surface.
NOTE
࡛ If it is difficult to clean the heat exchanger
ͱ˙ϩ˵ʪͱЇϩʒͱͱθЇϩࡥʀͱϩɇʀϩϩ˵ʪͱʀɇϑʪθЭʀʪ
center.
Before cleaning the indoor unit, be sure to turn off the auxiliary power switch.