Samsung Electronics 4-14
No Parts Procedure Remark
4 Heat Exchanger 1) Release the refrigerant at first.
2)
Loosen fixing screw. (Use +Screw Driver.)
3) Disassemble the pipes in both inlet and
outlet with welding torch.
4) Detach the Heat Exchanger.
5) Loosen 4 bolts fixed to assemble Valve
Service with Bracket Valve like the picture
on the right side. (Use Monkey Spanner.)
5 Compressor 1) Loosen the fixing nut and detach the
Compressor Lead Wire.
(Use Monkey Spanner.)
2) Disassemble the Felt Compressor Sound.
3) Loosen the 3 bolts at the bottom of
Compressor like the picture on the right
side. (Use Monkey Spanner.)
To Next Page
Loading...
