operating your freezer
MAKING ICE
Ice tray may look different depending on models.
Making ice cubes
1. Remove the ice cube tray by pulling it
towards you.
2. Fill the tray with water up to the maximum
water level marked on the tray.
3. Slide the tray back into the holder, taking
care not to spill the water.
4. Wait until the ice cubes are formed.
Freezing time
It is recommended that you wait for about
one hour with the temperature set to
Power Freeze for the ice cubes to form.
Removing the ice cubes
1. Make sure that the ice bin is in place
under the ice tray. If not, slide it into place.
2. Twist one of the levers firmly in the
clockwise direction until the tray twists
slightly. The ice cubes fall into the storage
bin.
3. Repeat Step 2 for the other half of the tray,
if necessary.
4. To get ice, slightly lift up the ice tray and
pull it towards you.
22_
operating
To Next Page
