Installation
Location
The ERV must be located in a conditioned space where it will be possible to conveniently service the unit. Typically the ERV would be
located in the mechanical room, above a drop
ceiling or an area close to the outside wall where the weatherhoods will be mounted.
Attic installations are not normally recommended due to extreme temperatures, and difficulty in performing required service &
maintenance. If an attic is selected, special care should be taken in ensuring the unit will perform as intended. Unit may need to be
protected with an insulated shelter built on site.
Connecting appliances to the ERV It is not recommended, including:
• clothes dryer
• kitchen exhaust hoods
• combustion venting
• central vacuum system
These appliances may cause lint, dust or grease to collect in the ERV, damaging the unit.
Connecting any of these type of appliances to the ERV will invalidate your warranty
A
B
C
D
E
F
G
Models A B C D E F G
Kg lbs Kg lbs in. mm. Kg lbs Kg lbs Kg lbs in. mm.
AN035NSEDAV/AA 16.6 36.6 15.6 34.4 12.6 320 58 127.9 13.6 30 12.7 28 17.6 448
AN075NSEDAV/AA 21.7 47.8 20.4 44.9 15.4 390 76 168 17.8 39.3 16.6 36.6 17.6 448
AN120NSEDAV/AA 31.4 69.3 25.8 56.9 10 254 102.5 226 26.7 58.9 21.2 46.7 19 483
To Next Page
Loading...
