Messages 143
•
If your network requires SSL encryption, tap the
Use secure connection
(SSL)
field to place a check mark in the box and activate this additional
level. Most often, this option should be enabled.
Important!
If your Exchange server requires this feature, leaving this
field unchecked can prevent connection.
9. Consult your IT Administrator if it is necessary to enable the
Use client certification
option.
10. With the new server information entered, tap
Next
.
11. Read the on-screen
Activation
disclaimer and, when prompted,
tap
OK
. The device then verifies your incoming server settings.
12. If prompted, read the
Remote security administration
information and tap
OK
to accept the service and continue.
13. Adjust the various on-screen configuration fields and tap
Next
.
It may take a few seconds for the next screen to load.
•
Enabling the
Automatically download attachments when
connected to Wi-Fi
option decreases the wait time to access large
email attachments.
14. If prompted, read the
Activate device administrator?
screen and
tap
Activate
to complete the email setup process.
Note:
This process can take a few minutes. If the previous setup
screen re-appears,
ignore it and do not alter any fields
during
this process.
To Next Page
Loading...
