37
Getting ready
Attaching/removing an au IC card
Make sure to turn off the product beforehand when attaching/removing an au IC card.
If the Aramid fiber case (sample) is attached to the product, detach the Aramid fiber case (sample).
Attaching the au IC card
a
Insert the tip of the SIM card removal tool (sample) into the au IC card tray eject hole in a straight
line
The au IC card tray will slightly eject.
• Not inserting the tool in a straight line might result in damage or a fault.
b
Pull out the au IC card tray in a straight line
To Next Page
Loading...
