43
Getting ready
Using the Galaxy Buds (sample)
Galaxy Buds main unit are wireless earphones. Music can be listened to on the product, and incoming calls can be
answered on the product which is connected.
• When using them for the first time, or if they have not been used for a while, use the charging case to charge
the Galaxy Buds main unit before
using them. If the Galaxy Buds main unit's battery capacities are completely
exhausted, they cannot be used until they have been charged for 10 minutes or more
• The USB Ty
pe-C cable (sample) and specified charger (sold separately) can be used to charge the Galaxy Buds
(sample).
Connect the Galaxy Buds main unit and the product
Touch pad
Earphone battery
indicator lamp
Charging case battery
indicator lamp
Galaxy Buds main unit
a
Open the charging case
b
Verify the Galaxy Buds main unit's L and R, and correctly put them into the charging case's L and
R slots
• The earphone battery indicator lamp lights up re
d, thus the Galaxy Buds main unit are being charged.
When the charging is completed, it lights up green.
c
Close the charging case
d
Open the charging case
• The Galaxy Buds main unit automatically enter into Bluetooth pairing mode.
e
Flick the product's home screen up or down → [Galaxy] → [Galaxy Wearable], start the
application, and follow the onscreen instructions to complete the connection
• Once
the product and the Galaxy Buds main unit are connected, the product will automatically be
conne
cted to the product every time the charging case is opened with the Galaxy Buds main unit in
the charging case.
To Next Page
Loading...
