EasyManua.ls Logo

Samsung Galaxy J2 Pure - Wi-Fi Network Configuration

Samsung Galaxy J2 Pure
147 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Connections
Manage connections between your device and a variety of networks and other
devices.
Wi-Fi
You can connect your device to a Wi-Fi network to access the Internet without using
your mobile data.
1.
From Settings, tap Connections > Wi-Fi, and then tap to turn on
Wi-Fi and scan for available networks.
2. Tap a network.
When you select an open network, connection happens automaticallly.
Otherwise, enter a password to connect.
Manually connect to a Wi-Fi network
If the Wi-Fi network you want is not listed after a scan, you can still connect to it by
entering the information manually.
Ask the Wi-Fi network administrator for the name and password before you begin.
1.
From Settings, tap Connections > Wi-Fi, and then tap to turn on Wi-Fi.
2.
Tap Add network at the bottom of the list.
3. Enter information about the Wi-Fi network:
Network name: Type the exact name of the network.
Security: Select a security option from the list, and enter the password if
required.
Auto reconnect: Choose this option if you want to automatically reconnect to
this network whenever you are in range.
Show advanced options: Add any advanced options, such as IP and Proxy
settings.
4. Tap Connect.
91
Settings

Table of Contents

Related product manuals