6
Getting Started
Assemble Your Device
Assemble Your Device
This section helps you to assemble your
device.
Remove the Back Cover
Open the back cover to install the SIM card, an
optional SD card, and replace the battery.
1. Remove the back cover using the slot on the
topleft of your device.
2. Lift the cover up and to the right of the device.
Warning: Do not bend or twist the back cover
excessively. Doing so may damage the cover.
Install the SIM Card
When you subscribe to a cellular network, you are
provided with a plug-in SIM card. During activation,
your SIM card is loaded with your subscription details,
such as your Personal Identification Number (PIN),
available optional services, and other features.
Warning: Please be careful when handling the SIMcard
to avoid damaging it. Keep all SIM cards outof reach of
small children.
Note: The SIM card slot is located below the micro SD
card slot.
To Next Page
Loading...
