Useful apps
124
Starting Smart Remote
1
Tap
Smart Remote
on the All apps screen.
2
Tap
Select country or region
and select a country, region, and broadcast service.
3
Tap
Personalise
, tick your favourite genres and sports, and then tap
Next
.
4
Tap
Age
or
Gender
to set your profile, and then tap
Done
.
5
Tap
→
Continue
.
6
Select the TV brand.
To connect the device to a projector and use the device as a remote control, tap
I have a
projector
.
7
Ensure that the device’s infrared port is facing the TV and tap
TV
. Then, tap
Yes, this code
1 works
if the device turns on the TV.
If the device does not turn on the TV, tap
Send this code 1 again
or
No, test next code 2
,
and then repeat this until the TV recognises the signal.
8
Select a channel source.
Using the device as a remote control
You can turn the TV on or off, browse channels, or adjust the volume level on the TV using the
device as a remote control.
1
Tap
Smart Remote
on the All apps screen.
2
Select a category at the top of the screen.
3
Face the device’s infrared port to the TV, select a TV programme, and then tap
WATCH ON
TV
.
The selected programme will be shown on the connected TV.
To connect the device to a projector and use the device as a remote control, tap
www.devicemanuals.eu/
To connect the device to a projector and use the device as a remote control, tap
If the device does not turn on the TV, tap
www.devicemanuals.eu/
If the device does not turn on the TV, tap
You can turn the TV on or off, browse channels, or adjust the volume level on the TV using the
www.devicemanuals.eu/
You can turn the TV on or off, browse channels, or adjust the volume level on the TV using the
To Next Page
Loading...
