Accessibility
170
Mono audio
Mono output combines stereo sound into one signal that is played through all headset
speakers. Use this if you have a hearing impairment or if a single earbud is more convenient.
On the All apps screen, tap
Settings
→
Accessibility
→
Hearing
, and then tick
Mono audio
.
Sound detectors
Set the device to vibrate when it detects your doorbell or a baby crying.
Baby crying detector
1
On the All apps screen, tap
Settings
→
Accessibility
→
Hearing
→
Sound detectors
→
Baby crying detector
and tap the switch to activate it.
2
Read the on-screen information and tap
OK
.
3
Tap to start using the baby crying detector.
The device will vibrate when it detects sound and the alert will be saved as a log.
Doorbell detector
1
On the All apps screen, tap
Settings
→
Accessibility
→
Hearing
→
Sound detectors
→
Doorbell detector
and tap the switch to activate it.
2
Read the on-screen information and tap
OK
.
3
Tap to make a recording of your doorbell. When you are finished recording, tap
Next
.
4
Tap and ring your doorbell to check if it is recorded correctly. When the device detects
the doorbell sound, tap
OK
.
To change the doorbell sound, tap
→
Change doorbell sound
.
When the doorbell detector is set up, tap
to start using the doorbell detector. The device
will vibrate when it detects the doorbell sound.
to make a recording of your doorbell. When you are finished recording, tap
www.devicemanuals.eu/
to make a recording of your doorbell. When you are finished recording, tap
To Next Page
Loading...
