Samsung Galaxy Note5 - Pair Bluetooth Devices

139
Settings Bluetooth
Scan for Bluetooth Devices
When you want to pair with another Bluetooth device,
you can scan for nearby devices that are visible.
1. From a Home screen, tap Apps > Settings.
2. Tap Bluetooth, and then tap ON/OFF to turn on
Bluetooth.
3. When Bluetooth is first turned on, it scans for
nearby Bluetooth devices and displays them.
•
Tap SCAN to manually perform a new scan.
Pair Bluetooth Devices
The Bluetooth pairing process allows you to establish
trusted connections between your device and another
Bluetooth device.
Pairing between two Bluetooth devices is a one-time
process. Once a pairing is created, the devices will
continue to recognize their partnership and exchange
information without having to re-enter a passcode.
1. From a Home screen, tap Apps > Settings.
2. Tap Bluetooth, and then tap ON/OFF to turn on
Bluetooth.
•
Make sure that the target device is discoverable
so that your device can find it. Refer to the
instructions that came with the device to find out
how to set it to discoverable mode.
3. Tap SCAN. Your device will start to scan for
Bluetooth devices within range.
4. When you see the name of the target device
displayed in the Bluetooth devices section, tap the
name. Your device then automatically tries to pair
with the target device. If automatic pairing fails,
enter the passcode supplied with the target device.