162
Settings
S Pen
S Pen
Configure options and settings for the S Pen.
To configure settings for the SPen:
1. From a Home screen, tap Apps > Settings
2. Tap S Pen to configure the following settings:
•
Air command: Turn the Air command feature on.
•
Air view: Turn the Air view feature on.
•
Direct pen input: Turn the Direct pen input
feature on. This feature allows you to switch
from the keyboard to the SPen when filling in
form fields.
•
Pointer: Turn the pointer on. The pointer
appears on the screen when the tip of the SPen
is hovering close enough. Holding the pointer
over some features can reveal what an item is or
what it does.
•
Screen off memo: Create action memos by
detaching the S Pen while the screen is off and
writing on the screen.
•
S Pen alerts: Tap the check box to set your
device to sound an alert and show a pop-up if
you forget to attach the S Pen and walk away
from it with your device.
•
Turn off pen detection: Turning off pen
detection when the pen is attached can extend
battery life.
•
S Pen sound: Tap the check box to enable
sounds when writing with the S Pen.
•
S Pen vibration: Activate vibration feedback
when writing with the S Pen.
For more information on using the S Pen, see
“S Pen” on page25.