Settings 292
3. Tap the ON/OFF switch to turn Wi-Fi on.
Wi-Fi is enabled. You will see the names and security settings of in-range Wi-Fi networks.
To disable Wi-Fi, tap the ON/OFF switch again.
4. Tap a Wi-Fi network, enter the password, and tap CONNECT.
Your phone is connected to the selected Wi-Fi network.
The password, for a household wireless LAN router, is sometimes found on a sticker on the
router (WEP, WPA, KEY, etc.). Contact the router manufacturer for information. For
password for a public wireless LAN, check with user's service provider.
Entering a password is not required if an access point is not security protected.
To Next Page
Loading...
