Enter an SSID for the AP and select a security type.
2
Set the security settings according to the security type
3
you selected, and then select Save.
Connect to a Wi-Fi AP with a protected setup
›
You can connect to a secured AP with a WPS button or WPS
PIN. To use this method, your wireless access point must have
a WPS button.
Connect with a WPS button
In the application list, select
1
Settings
→
Wi-Fi.
Press [
2
]
→
WPS push button.
Press the WPS button on the AP within 2 minutes.
3
Connect with a WPS PIN
In the application list, select
1
Settings
→
Wi-Fi.
Press [
2
]
→
WPS PIN entry.
On the AP, enter the PIN of your device.
3
Set the static IP settings
›
In the application list, select
1
Settings
→
Wi-Fi.
Select an AP
2
→
Show advanced options.
Select the
3
IP settings drop-down menu.
Select
4
Static.
Change the IP settings.
5
Select
6
Connect.
To Next Page
Loading...
