Reconnect to a Bluetooth Device
When you have paired your phone with another device, you should be able to reconnect it
automatically by turning on Bluetooth on your phone.
1. Press and touch > Settings > Connect
ions t
ab.
2. Touch the Bluetooth OFF/ON slider to turn Bluetooth on.
3. Make sure that the target device is discoverable.
4. Touch the target device’s name in the Bluetooth devices section.
5. If prompted to enter a passcode, try 0000 or 1234, or consult the target device’s
documentation to find the passcode.
If you still cannot reconnect, follow the instructions in Disconnect or Unpair from a
Bluetooth Device, and then follow the instructions in Pairing with a Bluetooth Device.
Disconnect or Unpair from a Bluetooth Device
Follow these instructions to disconnect or unpair your phone from a Bluetooth device.
Disconnect from a Bluetooth Device
1. Press and touch > Settings > Connections tab.
2. Touch the Bluetooth OFF/ON slider to turn Bluetooth on.
3. Touch the connected device, and then touch OK to disconnect.
Unpair from a Bluetooth Device
You can make your phone forget its pairing connection with another Bluetooth device. To
connect to the other device again, you may need to enter or confirm a passcode again.
1. Press and touch > Settings.
2. Touch the Bluetooth OFF/ON slider
to turn Bluetooth on.
3. In the Paired devices section, touch next to the device, and
then touch Unpair.
Tools and Calendar 126
To Next Page
Loading...
