Samsung Galaxy S6 edge - Page 438

436
Datacommunication
Pairing/Connectingwith
Bluetoothdevice
To transfer data between your terminal and other
Bluetooth device, perform paring with the device
and register it to the terminal beforehand. And
then perform connection.
• Depending on Bluetooth device, only pairing
may be performed or pairing and connection
may be performed successively.
1
From the Home screen, →
"Settings" → "Bluetooth"
2
Tap
• Detected Bluetooth devices are displayed
by list.
• If no Bluetooth devices are displayed, tap
"REFRESH" to re-search.
3
Tap a device you want to connect
4
Conrm a pass code or enter pass
code (PIN) → "OK"
• Even for devices requiring entry of
pass code when pairing, once pairing
is performed, entering pass code is not
necessary for next connection.