Samsung Galaxy S6 edge - Updating Software

492
Appendix/Index
Updatingsoftware
Softwareupdate
Download update le for the terminal from the
download site on the Internet and update the
software. For software update, there are 2
methods; connecting to the network directly on
the terminal and using Galaxy Smart Switch PC
(P.443) installed to a PC.
Precautionsonsoftwareupdate
Software update can be done with the data
saved to the terminal remained. However, note
that depending on your terminal condition
(malfunction, damage, water-soaked, etc.),
the data may not be protected. You are
recommended to backup the user information
and data in the terminal just in case. However,
some data may not be backed up.
• Prepare the followings before software update.
- Exit all programs running on the terminal
(P.146).
- Charge the terminal (P.66) to make the
battery level enough.
• For updating software by connecting
the terminal to network directly, you are
recommended to perform in a place with good
signal condition, without moving. When the
signal condition is bad, software update may
be interrupted.