Settings 186
3. Select CDMA, LTE / CDMA, GSM / UMTS, or
Automatic.
•
The phone will scan for the best available Sprint
network and will automatically connect to it.
When your phone is connected using 4G LTE, LTE
appears above the signal strength indicator in the
status bar.
Note: The Sprint networks are self‑discoverable, which
means no additional steps are required for your phone
to connect to them.
Your User Name
When you buy your phone and sign up for service,
you are automatically assigned a user name, which is
typically based on your name and a number, followed
by “@sprintpcs.com.” (For example, the third John
Smith to sign up for Sprint data services might have
jsmith003@sprintpcs.com as his user name.)
When you use data services, your user name is
submitted to identify you to the network. Your user
name is automatically programmed into your phone.
You do not have to enter it.
Find Your User Name
You can find your user name through your phone’s
device menu.
1. From home, swipe up to access Apps.
2. Tap Settings > About phone.
3. Tap Status.
You will see your user name under the “Username”
heading.
To Next Page
Loading...
