Samsung Galaxy Tab 10.1 - Pairing with a Bluetooth Device

Connections 145
2. Under
Wireless and network , on the Wi-Fi tab, tap the
OFF / ON icon to turn Wi-Fi on.
Turning Wi-Fi Off:
1. From any screen, tap the Time in the Status Bar.
The Status Details displays.
2. Tap
Wi-Fi to turn Wi-Fi Off.
Wi-Fi Status Indicators
The following icons indicate the Wi-Fi connection status:
Displays when Wi-Fi is active and there is an
available open wireless network.
Displays when Wi-Fi is connected, active, and
communicating with a Wireless Access Point
(WAP).
Scanning and Connecting to a Wi - Fi Network
When you turn on Wi-Fi, your device searches for available
Wi-Fi connections, then displays them on screen.
1. From any screen, tap the Time in the Status Bar.
The Status Details displays.
2. Tap
Wi-Fi to turn Wi-Fi On. Your device automatically
scans for available Wireless Access Points.
3. When the scan is complete, select a Wi-Fi network to
connect. If the Wi-Fi network is open, your device
automatically connects. If the Wi-Fi network is
secured, enter the password at the prompt to connect.
Adding a Wi - Fi Network Manually
1. From a Home screen, tap Apps ➔ Settings .
2. Under
Wireless and network , on the Wi-Fi tab, tap the
OFF / ON icon to turn Wi-Fi on.
3. Tap
Add network , then enter network information:
• Network SSID : Enter the name of the Wi - Fi Wireless Access
Point (WAP).
•Security : Select the type of security used by the WAP.