238
Developer Options
Set options for application development.
USB Debugging
When enabled, allows debugging when the device is
attached to a PC by a USB cable.
Note:
This setting is used for development purposes.
1. From a Home screen, tap
Apps
➔
Settings
➔
Developer options
.
2. Tap
USB debugging
to enable or disable the setting.
When enabled, a check mark appears in the check
box.
Development Device ID
The identification number for your tablet when using it as a
development tool displays in this field.
Allowing Mock Locations
This setting is used by developers when developing
location-based applications. If you are a developer who is
testing a GPS applications using this device, you can tell the
device that the phone is at different GPS locations. In other
words, the phone is allowed to “mock” the coordinates.
Note:
This setting is used for development purposes.
1. From a Home screen, tap
Apps
➔
Settings
➔
Developer options
.
2. Tap
Allow mock locations
to enable or disable the
setting.
When enabled, a check mark appears in the check
box.
To Next Page
Loading...
