146
Note:
Depending on the Security protocol used by the WAP,
additional network information may be required, such as
a Password.
• Password
: If the WAP is secured, enter the password or hex
key.
4. Tap
Save
to save the settings.
Wi-Fi Sleep Policy
Specify when to disconnect from Wi-Fi.
1. From a Home screen, tap
Apps
➔
Settings
.
2. Under
Wireless and network
, tap
Wi-Fi
.
3. Tap
Menu
➔
Advanced
.
4. Tap
Keep Wi-Fi on during sleep
. Choose from:
Always
,
Only when plugged in
, or
Never (increases data usage)
.
Wi-Fi Direct
Wi-Fi Direct allows device-to-device connections so you can
transfer large amounts of data over a Wi-Fi connection.
1. From a Home screen, tap
Apps
➔
Settings
➔
More ...
➔
Wi-Fi Direct
.
2. Tap the
OFF / ON
icon to turn Wi-Fi Direct on.
If you are currently connected to a Wi-Fi network, a
prompt displays
Start Wi-Fi Direct operation. This will
turn off Wi-Fi client/hotspot operation
.
3. Tap
OK
to continue.
Your device will begin to search for other devices
enabled with Wi-Fi direct connections.
4. Tap the Wi-Fi Direct tab to display Available devices.
5. Enable Wi-Fi Direct (similar to Steps 1 and 2) on the
device to which you want to connect.
6. Once the device you want to connect to is displayed,
tap it.
An Invitation to connect displays on the device to which
you want to connect.
To Next Page
Loading...
