212
Setting up Sound and Vibration
Set your tablet to make sounds and vibrate:
1. From a Home screen, tap
Apps
➔
Settings
➔
Sound
➔
Sound and vibration
.
2. Tap the check box to turn on Sound and vibration
mode.
A check mark appears in the check box when
Sound and vibration mode is On.
Audible System Tone Settings
These options are used when you use the dialing pad, make
a screen selection, lock your screen, or tap the screen. Each
time you press a key or make a selection the selected tone
sounds. You can activate or deactivate both touch and screen
lock sounds.
1. From a Home screen, tap
Apps
➔
Settings
➔
Sound
.
2. Tap
Touch sounds
to activate a tone when you touch the
screen. A check mark displayed next to this feature
indicates active status. When enabled, a check mark
appears in the check box.
Tap
Screen lock sound
to activate a tone when you use
the Lock screen. A check mark displayed next to this
feature indicates active status. When enabled, a check
mark appears in the check box.
3. Tap
Vibrate on screen tap
to enable or disable vibration
when you touch or tap the screen.
When enabled, a check mark appears in the check
box. When Vibrate on screen tap is enabled, the device
vibrates to indicate screen touches and other
interactions.
To Next Page
Loading...
