Samsung Galaxy Tab 10.1 - System; Motion

Settings 233
Configuring Voice Input Recognition
This feature allows the device to correctly recognize verbal
input.
1. From a Home screen, tap
Apps ➔ Settings
➔
Language and input ➔ Voice search .
2. Configure the available options to alter the settings
associated with this feature:
• Language : selects an input language and associated dialect
recognition (if available).
• SafeSearch : sets the explicit image filter settings. These
settings apply to only Google voice search results. Choose
from:
Off , Moderate , or Strict .
• Block offensive words : allows you to block recognition of
known offensive words or language. (A green check mark
indicates the feature is active).
Configuring Text-to-speech
This feature allows the device to provide a verbal readout of
on-screen data such as messages and incoming caller
information. This action is called TTS (Text To Speech).
1. From a Home screen, tap
Apps ➔ Settings
➔
Language and input ➔ Text-to-speech output .
2. Select a current Preferred TTS engine from the list of
available options. The default is Google Text-to-
speech.
3. Tap next to the preferred TTS engine and
configure.
4. Configure the General options to alter the settings
associated with this feature:
• Speech rate : adjusts the rate at which on-screen text is
spoken by the device. Choose from:
Very slow , Slow , Normal ,
Fast , and Very fast .
• Listen to an example : plays a short example of what the text-
to-speech feature sounds like on your device when activated.