Samsung Galaxy Tab A 10.1 - Initial Setup and Camera Introduction

Basics
20
Initial setup
When you turn on your device for the first time or after performing a data reset, follow the
on-screen instructions to set up your device.
If you do not connect to a Wi-Fi network, you may not be able to set up some device
features during the initial setup.
Camera
Introduction
Take photos and record videos using various modes and settings.
Camera etiquette
•
Do not take photos or record videos of other people without their permission.
•
Do not take photos or record videos where legally prohibited.
•
Do not take photos or record videos in places where you may violate other people’s
privacy.
Taking photos
1 Launch the Camera app.
•
Some camera features are not available when you launch the Camera app from the
locked screen or when the screen is turned off while the screen lock method is set.
•
The camera automatically shuts off when unused.
•
Some methods may not be available depending on the service provider or model.
2 Tap the image on the preview screen where the camera should focus.
To adjust the brightness of photos, drag the adjustment bar that appears above or below
the circular frame.