Getting started
13
microSD card
Inserting an SD card
Your device’s SD card capacity may vary from other models and some SD cards may not be
compatible with your device depending on the SD card manufacturer and type. To check out
your device’s maximum SD card capacity, refer to the Samsung website.
1 Remove the back cover.
2 Insert an SD card with the gold-coloured contacts facing downwards.
3 Replace the back cover.
•
Use only a microSD card.
•
Some SD cards may not be fully compatible with the device. Using an incompatible
card may damage the device, the SD card, or the data stored in it.
•
Use caution to insert the SD card right-side up.
•
The device supports the FAT and the exFAT file systems for SD cards. When inserting
a card formatted in a different file system, the device will ask to reformat the card
or will not recognise the card. To use the SD card, you must format it. If your device
cannot format or recognise the SD card, contact the SD card manufacturer or a
Samsung Service Centre.
•
Frequent writing and erasing of data shortens the lifespan of SD cards.
•
When inserting an SD card into the device, the SD card’s file directory appears in the
My Files
→
SD card
folder.
To Next Page
Loading...
