Getting started
9
Wired charging
Connect the USB cable to the USB power adaptor and plug the cable into the device’s
multipurpose jack to charge the battery. After fully charging, disconnect the charger from the
device.
Do not remove the battery before removing the charger. This may damage the device.
Quick charging
Launch the
Settings
app, tap
Battery and device care
→
Battery
→
More battery settings
,
and then activate the feature you want.
•
Fast charging
: To use the fast charging feature, use a battery charger that supports
Adaptive fast charging.
You can charge the battery more quickly while the device or its screen is turned off.
Charging other devices
Use the USB cable to charge another mobile device with your device’s battery.
Connect your device and the other device using your device’s USB cable. A USB connector
may be needed depending on the other device.
When charging starts, the battery charging icon will appear on the other device’s screen.
The app selection pop-up window that appears on your device is for data transfer. Do
not select an app from the pop-up window.
To Next Page
Loading...
