4
Assemble Your Device
Getting Started
This section helps you to
assemble your device.
Install the SIM Card
When you subscribe to a cellular network, you are
provided with a plug-in SIM card. During activation,
your SIM card is loaded with your subscription
details, such as your PIN, available optional
services, and other features.
Warning: Please be careful when handling the
SIMcard to avoid damaging it. Keep all SIM cards
outof reach of small children.
1. Open the SIM card slot cover and turn to expose
the slot.
2. Carefully slide the SIM card into the SIM card
slot until the card locks into place.
Make sure that the card’s gold contacts face into
the device and that the upper-left angled corner
of the card is positioned as shown.
3. Close the SIM card slot cover.
Caution: If the card is not inserted correctly, the
device cannot detect the SIM card. Reorient the
card and place it back into the slot if the SIM is not
detected.
Install an Optional Memory Card
You can install an optional microSD
™
or
microSDHC
™
memory card (not included) to add
more memory space to your device.
Note: A memory card can be installed at any time; it
is not necessary to install it prior to using the device.
For more information on installing a memory card,
see Memory Card (SD Card).
1. Open the memory card slot cover and turn to
expose the slot.
2. With the gold contacts facing down, carefully
slide the memory card into the slot, pushing
gently until it clicks into place.
3. Close the memory card slot cover.
Assemble Your Device
To Next Page
Loading...
