Samsung Galaxy Tab S - More Networks

70
More NetworksSettings
More Networks
The More networks settings
allow you to configure a variety
of connectivity settings for your
device.
Nearby Device Scanning
Scan for nearby devices to connect to and set them
up easily. You receive a notification when there are
available devices to connect to.
Note: This function uses Bluetooth low energy
scanning even if Bluetooth is turned off on your
device.
To enable nearby device scanning:
1. From a Home screen, tap Apps > Settings
> Connections.
2. Tap Morenetworks > Nearbydevicescanning.
3. Tap On/Off to enable the feature.
Mobile Networks
Control your device’s access to networks and
mobile data service.
1. From a Home screen, tap Apps > Settings
> Connections.
2. Tap More networks > Mobile networks for
options:
•
Mobile data: Allow your device to connect to a
mobile data network.
•
International data roaming: Allow your device
to connect to data services while traveling
internationally. Higher charges may result.
•
Access point names: Select the Access Point
Name for mobile connection to the Internet.
•
Network operators: Choose available and
preferred networks
Note: You must deactivate data service prior to
searching for an available network.
Note: Connecting to 3G networks slows the data
transfer speed and time.
Default Setup Options
Your device default is set to Automatic, which
causes your tablet to automatically search for an
available network.
To select a network each time you connect, set this
option:
1. From a Home screen, tap Apps > Settings
> Connections.
2. Tap More networks > Mobile networks.
3. Tap Network operators.
4. Tap Default setup to locate and connect to
a network manually or to allow the device to
automatically select a network.
AT&T MicroCell
To search for an AT&T MicroCell:
1. From a Home screen, tap Apps > Settings
> Connections.
2. Tap More networks > Mobile networks.
3. Tap Network operators.
4. Tap Search for AT&T MicroCell.
Your AT&T MicroCell must be installed and activated
before you can connect to it.
For more information, visit att.com/esupport.