2F. microSD Card 105
microSD Card
Reinserting the microSD Card
1. Place your fingernail into the card slot and pull the
cover outwards.
2. Position the card with the gold strips facing down.
3. Firmly press the card into the slot and make sure
that it catches with the push-click insertion.
microSD Icon Indicators
The following icons show your microSD card
connection status at a glance:
– card has been unmounted (released from use)
from the device.
– card is being prepared for mounting and its
contents are being scanned.
– card has been properly unmounted from the
device but is missing.
– card has been incorrectly removed or
improperly mounted.
WARNING: Do not push the card in too far as this can
damage the contact pins.
Note: Be sure to use only recommended microSD cards (not
to exceed 32GB). Using non-recommended microSD
cards could cause data loss and damage your device.
Note: Make sure the microSD card's gold contacts are facing
down.
SPH-P100.book Page 105 Thursday, October 14, 2010 2:31 PM
To Next Page
Loading...
