2B. Settings 57
Settings
3. Tap Set date. Adjust the date, month, and year by
tapping or . Tap
Set when finished.
4. Tap Select time zone, and then select a time zone
from the onscreen list. Flick through the list to view
additional time zones.
5. Tap Set time. Adjust the hour and minute by
tapping or . Tap the
AM or PM icon to
change the value. Tap
Set when finished.
6. Tap Use 24-hour format to toggle between using a
12-hour or a 24-hour format.
7. Tap Select date format to select how the date
information is displayed on your device. The
selected date format is also applied to the date
displayed within the device’s alarm clock.
Language Settings
To assign the default language used for menus and
other interface features:
1. Press > and tap > Locale and
text > Select locale.
2. Tap English or Español. All menus are then
updated to the new language.
Location Settings
Your device is equipped with a Location feature for use
in connection with location-based services.
The Location feature allows the network to detect your
position. Turning Location off will hide your location
from everyone except 911.
To enable your device’s GPS Location feature:
1. Press > and tap >
Location and security.
Note: Turning Location on will allow the network to detect
your position using GPS technology, making some
Sprint applications and services easier to use. Turning
Location off will disable the GPS location function for all
purposes except 911, but will not hide your general
location based on the used cell site. No application or
service may use your location without your request or
permission. GPS-enhanced 911 is not available in all
areas.
SPH-P100.book Page 57 Thursday, October 14, 2010 2:31 PM
To Next Page
Loading...
